Stainless Steel Stand

The Chihiros Stainless Steel Stand is designed as a spare part / accessory for the LED lamps of the A, A-Plus and RGB series.

The buttres of the Chihiros Stainless Steel Stand are inserted into the transparent plastic holder and fixed by means of small screws at the desired height. This makes it easy, fast and convenient to mount the Chihiros LED lamps of the A, A-Plus and RGB series exactly above the height of your aquarium, as you wish, whereby the maximum height above the aquarium can be just under 22 cm. Perfect if you are e.g. cultivating plants that grow up out of the open aquarium. The aquatic plants thus have enough "air" without poking at the LED light.

The Chihiros Stainless Steel Stand is available in two versions ... one with a larger holder,100 mm width for A-Plus and RGB Series and for a maximum glass thickness of 13 mm, and another as a variant with a smaller holder of 57 mm width for A Series and for a maximum glass thickness of 10 mm. Note: The Chihiros Stainless Steel Stand is designed only for aquariums without frames, as the transparent plastic holder is mounted directly on the side glass.

Content
The complete set for one lamp consists of the following components:
- 4 stainless steel supports
- 2 transparent plastic mounts
- 4 stainless steel screws for fixing the supports in the holder
- 4 plastic screws for clamping the plastic holder to the aquarium glass
- 1 screwdriver for mounting