CO2 Hose Set

CO2 hoses, especially in connection with glassware, should be safe and possibly even inconspicuous. Here, AQUA-NOA offers an perfect solution with the CO2 hose set consisting of ...
• 1x Silicone Hose, 2 m, milky transparent, 4/6 mm
• 1x Check Valve (transparent)
• 4x Suction Cups, transparent, for guiding hoses
• 2x Suction Cups, transparent, for e.g. mounting a diffuser

Important information about CO2 hoses
CO2 hoses are divided into two types:
• Pressure hose, CO2-impermeable, slightly stiffer, high pressure resistance
• Silicone hose, CO2-impermeable, very soft and flexible, hardly pressure-resistant

In general, it is recommended to lay all lines up to the check valve with a CO2 pressure hose. Highly recommended is the CO2 high-pressure hose, if you interpose a solenoid valve. From the CO2 pressure reducer to the CO2 solenoid valve, there should always be a CO2 pressure hose installed, as high pressure builds up there when the solenoid valve is closed.

The AQUA-NOA CO2 silicone hose is very soft and flexible, it is ideal for all lines from the check valve to the CO2 diffuser or other CO2 feeders. The silicone hose can easily be laid over the pelvic edge and it can also be easily attached to sensitive glass diffusers. Because the CO2 silicone hose is so soft and flexible, it slides well over the fine glass connection and remains securely connected.

TIP: Some "spit" or some water still helps to push the CO2 silicone hose onto the glassware.