CO2 Silicon Hose Special (tube)

Hoses for CO2 lines should not only be safe, but also functional. AQUA-NOA offers an ideal solution here with the reinforced CO2 silicone hose special in milky-transparent or black. The CO2 silicone hose special from Aqua-Noa has been specially developed for connecting glassware..

Important information about CO2 hoses
CO2 hoses are divided into two types:
• Pressure hose, CO2 impermeable, slightly stiffer, high pressure resistance
• Silicone hose, impermeable to CO2, very soft and flexible, hardly pressure-resistant

It is generally recommended that all lines up to the check valve be laid with a CO2 pressure hose. The CO2 high-pressure hose is strongly recommended if you connect a solenoid valve. A CO2 pressure hose should always be installed from the CO2 pressure reducer to the CO2 solenoid valve, as high pressure builds up there when the solenoid valve is closed.

The AQUA-NOA CO2 silicone hose special is very soft and flexible, it is ideal for all lines from the check valve to the CO2 diffuser or other CO2 addition devices. The special CO2 silicone hose can be easily laid over the edge of the pool and can also be easily attached to sensitive glass diffusers. Because the special CO2 silicone hose is so soft and flexible, it slips easily over the fine glass connection and remains securely connected.
TIP: A little “spit” or a little water still helps when pushing the Aqua-Noa CO2 silicone hose special onto the glassware

AQUA-NOA CO2 Silicon Hose Special
• soft and very flexible
• milky-transparent or black
• Diameter 4/6mm
• available in either 3 or 5 meters
• CO2 and air impermeable