Neo CO2 Diffusor Extend Type

Acrylic CO2 Diffuser / CO2 Reactor
individually bendable by heating with special ceramic membrane for very fine CO2 bubbles with matching suction cup
Available variants
16.90 €
17.90 €
18.90 €

Article in stock

Delivery time 1-3 business days*

please select your desired variant above
P on purchase receive bonus points now**
The AQUARIO Neo CO2 Diffuser Extend Type made of acrylic is individually bendable by heating... more
AQUARIONeo CO2 Diffusor Extend Type

The AQUARIO Neo CO2 Diffuser Extend Type made of acrylic is individually bendable by heating and can therefore be perfectly adapted to your Aquarium. The special ceramic membrane of the AQUARIO Neo CO2 Diffusor Extend Type ensures very small and fine CO2 bubbles in the Aquarium, which means that the CO2 is very effectively dissolved in the water. The AQUARIO Neo CO2 Diffusor Extend Type comes with a suitable suction cup.

In the packaging of the AQUARIO Neo CO2 Diffusor Extend Type you will find two separate extra tubes which you can use for testing before you start working on the actual diffuser. By heating the tube (e.g. over a candle flame or lighter), the acrylic glass becomes soft and flexible and can be brought into the desired shape for your Aquarium. See also the product photos above.

Before starting up in the aquarium, soak the AQUARIO Neo CO2 Diffuser Extend Type in water for 10 minutes so that all the air in the diffuser is displaced and the pores of the ceramic membrane are watered. If there is still air in the diffuser, larger bubbles can form at the lower edge of the diffuser ceramic. If the CO2 bubbles grow larger over time, you can use a suitable cleaning solution for the membrane, e.g. to remove calcifications.

This way it works!
• thread the enclosed elastic band into the acrylic tube of the CO2 diffuser.
• hold the diffuser or the pipe to the left and right of the desired bending point.
• hold the desired bending point at a distance of 1-3 cm over a candle flame (or lighter flame), turn the pipe and move it back and forth minimally.
• as soon as the acrylic has softened sufficiently, the area can be bent into shape.
• the previously introduced rubber band reduces the risk of bending the inside diameter of the tube during bending.
• after a short cooling, the previously inserted rubber band can be removed.

Tips for bending
• if you hold the pipe too close to the flame, it will quickly become sooty. Be sure to keep the specified distance.
• if you do not turn the tube during heating, the bend will be unclean and an unsightly bulge will appear at the bending point.
• as soon as the acrylic material has softened, a certain and quick bend is recommended.
• if a desired 180 ° bend is desired, it is advisable to expand the area to be bent a little during heating so that a wider piece of the acrylic tube becomes soft.
• if you want to bend the tube above the aquarium glass, simply make a 180 ° bend and hold it as far as possible from the desired bending point in order to then press the two respective pipe ends close to the aquarium glass. So the 180 ° bending point slowly extends far enough.

AQUARIO - Neo CO2 Diffusor Extend Type

Variants and technical Details

Neo CO2 Diffusor Extend Type Mini Medium Large
Height 380 mm 380 mm 380 mm
Width 24 mm 28 mm 35 mm
Membrane diameter 12 mm 17 mm 24 mm
suitable for hose 4/6 mm 4/6 mm 4/6 mm
Article information
Manufacturer AQUARIO

You miss informations?
We are happy to help you

Question to this product

show your friends what you like

Read product reviews and/or write your own review
Customer evaluation
AQUARIO :: Neo CO2 Diffusor Extend Type
3 Customer reviews
Allover 4,50 of 5 stars
3 reviews
5 stars (2)
4 stars (1)
3 stars (0)
2 stars (0)
1 star (0)
28 Apr 2021 • not verified

Excellent quality diffuser and as a bonus you can bend it after heating to suit your own needs. Top product.

23 Jan 2021 • not verified

Der Diffusor tut was er soll, die Blasen sind sogar relativ klein und werden durch den darüber liegenden Ausströmer gut im Aquarium verteilt. Ein leichtes Sprudelgeräusch ist wahrnehmbar, aber da muss man sich wohl dran gewöhnen.

Die beiden Übungsröhrchen sind sehr praktisch zum testen des Siegens, allerdings kommt nun das große ABER.

Man sollte das Kunststoff ungenutzt erhitzen. Ich habe mich nun nach einer Woche Nutzung an das Biegen gewagt und dafür eine Heissluftpistole genommen, um schwarze Stellen durch Feuerzeuge oder Kerzen zu verhindern. Bei dem Übungsstück, welches ich noch nicht genutzt hatte, ging das super, daher habe ich direkt beim Diffusor losgelegt. Ergebnis waren Blasen im und auf dem Acryl. Anscheinend reagiert das CO2 mit der Hitze und dem Acryl, was dazu führt. Ich habe das ganze dann noch mal mit dem ersten Übungsstück probiert um eine Fehlbedienung auszuschliessen, da war wieder alles in Ordnung. Das zweite Übungsstück war ebenfalls testweise in Benutzung und zeigte das gleiche Problem mit den Blasen, daher kann es nur daher kommen.

Also auf keinen Fall erst nutzen und dann biegen!!!

Reklamieren werde ich nicht, da es nur bei genauem hinsehen auffällt und ich die Chancen auf erfolg eher gering einschätze.

23 Nov 2020 • not verified


Write an evaluation
Ratings will be released after a short checking.

* required fields

your last viewed items