SP-Lollie Holder
Feeding equipmentWith the SP-Lollie Holder, shrimp lollies can be easily placed in the tank. Thanks to the plug holes, the lollies can be attached at any angle. The double locking thread makes it easy to attach the holder to aquariums and even very low nano tanks. At the same time, it makes it easier to remove the lollipop holder, thus avoiding frequent immersion in the water with hands that may be contaminated. Thanks to their special fine-print surface, the holders are less sensitive to dirt and can be easily cleaned under running water.
The SP-Lollie Holder is particularly stable and shatterproof thanks to the new PLA plastic with carbon fiber reinforcement, which is made from over 90% renewable raw materials. Water easily beads off of it.
The lollipop holder is suitable for panes with a thickness of 3-12 mm, with an immersion depth of approx. 140-220 mm.
The SP-Lollie Holder is compatible with rods with a diameter of 3 mm. Thinner rods compatible as well and thicker rods can also be adjusted by slightly sanding them.
Size (L×W×H): 246 × 50 × 18 mm
c/o Postflex #3186
Emsdettener Str. 10
48268 Greven
Deutschland
shrimppuddle.de
Manufacturer | ShrimpPuddle |
Article number | GH-2001880 |
Shipping weight | 0,02 kg |
ShrimpPuddle :: SP-Lollie Holder