Tropica
CO2 System Bio
Complete CO2 set CO2 fertilization for aquariums for healthy, vigorous plants easy to handle and use sufficient for approx. 60 days
P on purchase receive
bonus points now**
Most aquarium plants cannot live without a supply of CO2 - algae, on the other hand, can!... more
TropicaCO2 System Bio
Most aquarium plants cannot live without a supply of CO2 - algae, on the other hand, can!
Therefore, many aquarists experience that without additional CO2, their beautiful new plants quickly wither and the algae take over.
The Tropica CO2 System Bio is a low-cost solution for additional CO2 supply to the plants in the aquarium that is easy to install, use and maintain. The Tropica CO2 System Bio is well suited to use a sufficient CO2 supply in the aquarium as an alternative to conventional CO2 bottles. With the Tropica CO2 System Bio, the CO2 is generated using a special biological mass, which on the one hand is easy and uncomplicated to mix, but on the other hand is also easily biodegradable and can be disposed of accordingly.
Usage
• Pour 300 ml of warm water (approx. 50°C) into the bottle
• Put on the lid without a ventilation opening and shake the bottle vigorously for one minute
• Then leave the bottle at room temperature for at least 24 hours (the contents become a solid gel)
• At the same time, soak the CO2 diffuser in clean water for 24 hours
• After 24 hours add a portion of Activator to 200 ml of lukewarm water (max. 35°C)
• Leave the mixture to rest for 5 minutes, then stir until the activator has completely dissolved in the water
• Then pour the mixture into the bottle, place the seal in the cap with the ventilation opening and place it on the bottle
• Attach one end of the air hose to the bottle and the other end to the CO2 diffuser
• Place the CO2 diffuser in the desired location in the aquarium
• The CO2 set is now completely installed
• Note: It may take some time (depending on the temperature several hours) until the CO2 production starts
Usage
• Pour 300 ml of warm water (approx. 50°C) into the bottle
• Put on the lid without a ventilation opening and shake the bottle vigorously for one minute
• Then leave the bottle at room temperature for at least 24 hours (the contents become a solid gel)
• At the same time, soak the CO2 diffuser in clean water for 24 hours
• After 24 hours add a portion of Activator to 200 ml of lukewarm water (max. 35°C)
• Leave the mixture to rest for 5 minutes, then stir until the activator has completely dissolved in the water
• Then pour the mixture into the bottle, place the seal in the cap with the ventilation opening and place it on the bottle
• Attach one end of the air hose to the bottle and the other end to the CO2 diffuser
• Place the CO2 diffuser in the desired location in the aquarium
• The CO2 set is now completely installed
• Note: It may take some time (depending on the temperature several hours) until the CO2 production starts
The Tropica CO2 System Bio is designed to. about 60 days to produce CO2.
With the Tropica Activator Refill (optionally available as a refill pack) you can refill the CO2 system and produce CO2 again for about 60 days.
Dimensions
Diffuser Diameter: 18 mm
Diffuser Height: 27 mm
Diffuser Overall Height: 140 mm
Diffuser Diameter: 18 mm
Diffuser Height: 27 mm
Diffuser Overall Height: 140 mm
Lenght Hose: approx. 1 m
Scope of delivery
• Bio CO2 bottle with biomass attachment
• Activator in small refill packs
• CO2 hose
• Tropica CO2 diffuser
• Bio CO2 bottle with biomass attachment
• Activator in small refill packs
• CO2 hose
• Tropica CO2 diffuser
Article information
| Manufacturer | Tropica |
| Article number | GH-2001731 |
| EAN number | 5703249000118 |
| Shipping weight | 0,65 kg |
Read product reviews and/or write your own review
Customer evaluation
Tropica :: CO2 System Bio
Tropica :: CO2 System Bio
5 stars (0)
4 stars (0)
3 stars (0)
2 stars (0)
1 star (0)
Write an evaluation
Ratings will be released after a short checking.
your last viewed items