Filter Guard (Fine Mesh)
Intake protection / Filter accessoriesArticle in stock
Delivery time 1-3 business days*
Prices incl. VAT plus shipping
The Filter Guards are made of a high-quality fine stainless steel mesh and are perfectly suited to prevent the sucking and crawling of small aquarium inhabitants e.g. shrimp or small fish into the canister filter.
Even if the flow on the filter tube is not so high, Shrimp and snails like to crawl into the filter by themselves, because there is food for them. Common suction grids/slots are often too wide, allowing small shrimp and snails to pass easily. Unfortunately, which often happens, even if aquarium inhabitants do not fit through, they are held fast by the pull and die at the intake. This often happens with the popular glassware, the Lily Pipe Inflows, which have only a few slits and where the current or suction is very high, even fish can hang and snails are sucked out of the shell. Really ugly and we definitely do not want that, so we recommend using a Filter Guard (filter suction protection).
The Filter Guard is simply put over the intake pipe and the rubber lip adapts to the tube so that it closes tightly. The stainless steel net is so fine and tight that even the smallest shrimp are safe. Due to the distribution of the suction around the whole Filter Guard, the suction is low and no animals are sucked in and held.
The Filter Guards fit at all common pipe sizes, no matter if plastic pipe, stainless steel or glassware.
The Filter Guards are sturdy, very durable thanks to the stainless steel and can easily be cleaned with a hose brush from the inside, so you can use them over and over again.
Our tip
In hot water, the rubber becomes soft/flexible, making it easier to slide the Filter Guard over the pipe.
Or using a very few Vaseline, that is safe for the aquarium inhabitants. We recommend with every cleaning also to make sure that the rubber end pieces always sit correctly, far enough and tightly on the grid itself, in order to avoid an unintentional slipping out.
GH-GOODS - Filter Guard stainless steel intake protection
Variants and technical details
Filter Guard Version | Total height filter guard | Diameter mesh basket | Connection pipe diameter (tube) |
10 mm | 66 mm | 13 mm | 10 mm (9/12 mm) |
13 mm | 66 mm | 17 mm | 13 mm (12/16 mm) |
13 mm - long | 141 mm | 17 mm | 13 mm (12/16 mm) |
17 mm | 66 mm | 21 mm | 17 mm (16/22 mm) |
17 mm - long | 141 mm | 21 mm | 17 mm (16/22 mm) |
Ohlweg 8
22885 Barsbüttel
Deutschland
garnelenhaus.de
Manufacturer | GH-GOODS |
GH-GOODS :: Filter Guard (Fine Mesh)
Es schützt die Garnelen, nur leider habe drosselt es den Filter auch sehr stark. Nutze ihn an meinem Eden 501 Außenfilter im 30L Cube
Hält bombenfest auf den Edelstahlinflows und deckt die Öffnungen gerade so ab.
Nach ungefähr einem Jahr im Einsatz hielten die Kappen nicht mehr ordentlich und ich muss beim hantieren im Becken sehr vorsichtig sein. Dennoch nutze ich den Guard immer noch (nach 1.5 Jahren), nervt allerdings auch regelmäßig.
Schaut wirklich sehr edel auf meinem Edelstahl Inflow aus.
Schützt meine Garnelen wie gewünscht
Wäre praktisch wenn eine Seite geschlossen wäre musste jetzt doch noch mit einem Stück Schwamm die Unterseite verschließen ansonsten macht es was es soll .
Gute Qualität
Perfektes Fitting für die Ein und Ausläufe von GH Goods. Nur Vorsicht bei dem Gitter ist nicht so stabil.
Ich habe den Filter Guard jetzt ca. 3 Monate im Einsatz und es schützt alle im Becken vor dem Filtertod. Allerdings haben sich auch bei mir vor ca. 2 Wochen die Gummikappen von dem Edelstahlgitter gelöst. Hab dann alles gereinigt und wieder zusammen gesteckt und es ist zumindest nichts verrutscht. ich hoffe natürlich das es so bleibt.
Viele Grüße
Ich hatte den Artikel vor 4 Wochen bestellt. Zwischen letzter Woche und dieser ist das obere siebchen rein gerutscht und hat mir ein par fische und 2 dornaugen durch gelassen, alle tot. Ich bin sehr enttäuscht von diesem produkt, denn genau gegen einen solchen fall hatte ich es ja gekauft.
Answer from 12 Aug 2019
Hallo lexxi,
das ist natürlich traurig um die Fische. Meinst du das Sieb unten am Boden ist verrutscht? Üblicherweise sitzt das eigentlich fest und wird von dem seitlichen Sieb mit gehalten.
Meist wird der Filter-Guard auch ganz an der Lily-Pipe hoch geschoben, sodass das Ende der Lily-Pipe das Bodensieb berührt. Da kann dann eigentlich nichts verrutschen...
Mit freundlichen Grüßen
Dein Garnelenhaus-Team
Der Filterschutz funktioniert gut. Leider härten die Kappen mit der Zeit aus und die Gefahr besteht, das das Sieb von der Kappe abrutscht
Answer from 28 Jun 2019
Moin Manfred,
vielen Dank für dein Feedback. Wir nutzen die Filter Guards seit vielen Jahren und mussten noch nie eine Kappe tauschen, auch ist uns noch nie ein Sieb abgerutscht. Wir können aber natürlich nicht ausschließen, dass es doch mal passieren könnte. Ein Tipp, man kann die Kappen mit Wärme weich bekommen um sie enger zu machen, z.B. kurz in heißes Wasser halten...
Mit freundlichen Grüßen
Dein Garnelenhaus-Team